LEATHERWORKINGTOOLS
Browse tool departments

LEATHERWORKING TOOLS

Choose Bevelers, Slickers and Burnishers

Buy for the edge operation you need

An edge beveler removes material; a slicker smooths the remaining fibers; a folder forms or reinforces a fold or crease. A metal pressing body can flatten or press an area without being the same thing as a cutting beveler. Choose the operation your design needs before comparing attractive sets under a broad edge-tools heading.

IGVSP’s four-tool set is the cutting-width example: 0.8, 1, 1.5 and 2 mm, each on a separate wooden handle. WUTA’s Slim Stick is a wooden smoothing form, while CBHGFEA offers a glass slicker with a separate black-walnut grip. These are useful additions for different jobs, but their materials alone do not prescribe a complete finishing sequence for every leather.

A size number belongs to a particular beveler family

IGVSP labels its 0.8 mm tool #2. That number is not a universal width. For comparison, Tandy’s official Craftool Straight chart gives its own #2 a 1.4 mm bevel width; the distinct TandyPro Since #2 lists 1.8 mm. Their leather recommendations also belong to those named families. Do not carry a chart from one family across to another tool carrying the same number.

Weaver’s selected single edger is labeled 1/16 inch and has a maple handle with an angled working tip described for straight edges and corners. It is a one-size purchase to compare with IGVSP’s four widths. Choose the actual profile and nominal working size you need; neither the #2 label nor an overall tool dimension is a thickness rating. A set can be convenient when several edge sizes appear in your work, while a single known size avoids buying unused duplicates.

Compare the face that will meet the leather

WUTA’s Slim Stick is described for edges, flesh-side areas and access around zipper or card slots. It is a narrow-form alternative to the straight glass sides of the handled CBHGFEA slicker. The Black Walnut selection gives the latter a separate wooden grip; it does not include its other handle-wood variant. No reliable glass-face width is supplied, so confirm that span if it must cover a particular seam.

There is a specific version detail on the Slim Stick: the newer version adds a 1.5 mm groove and old/new versions are sent randomly. Choose it for the slim form rather than requiring that extra groove. A groove measurement describes the tool, not a guaranteed match to every edge of that thickness. The actual edge profile and your project still need to suit the chosen face.

Use a folder or pressing form when that is the missing job

The Craftool removable-head folder is 100% nylon, despite the traditional name bone folder. Its stated roles include small and large creasing, folding, smoothing and slicking. It is the more relevant comparison when a cover or case needs shaping around folds as well as edge work. The detachable head changes the working form; it does not mean several separately handled tools are supplied.

WUTA’s half-round black metal tool instead combines a 304 stainless-steel working body, a brass handle and a titanium-coated surface. It is described for flattening, pressing seams and burnishing. That pressing form is its useful distinction from a slim stick. Weight is given as both 716 g and 1.8 lb, so confirm the actual handling weight if mass is central to your choice; neither figure should become an exact guaranteed specification. No treatment recipe, tannage rule or sharpening angle follows from these tool comparisons.

Questions before choosing

Can I use a #2 chart from another brand?

Not reliably. IGVSP #2 is labeled 0.8 mm, while the separately named Tandy Craftool Straight and TandyPro Since #2 tools have their own widths. Compare the exact family and working size.

Will the WUTA Slim Stick definitely have the 1.5 mm groove?

No. The seller says the extra groove belongs to the new version and that old/new versions may be sent.

Is the Craftool bone folder actually made from bone?

This selected removable-head tool is described as 100% nylon. Its forming and creasing roles differ from a cutting beveler.

Which tool should I compare for pressing a seam rather than trimming an edge?

The half-round WUTA metal tool and the Craftool folder both list pressing or smoothing/forming roles in different formats. The IGVSP bevelers are cutting tools, so they answer a different need.

Manufacturer references

Put this guide in context

Bevelers & Burnishers ↗JOJOCY Adjustable Belt-Edge Trimmer ↗MAOLECOS Wide-Mouth Beveler and Skiver Set ↗IGVSP Four-Size Leather Edge Beveler Set ↗WUTA African Blackwood Slim-Stick Slicker ↗
See all 8 linked product dossiers
CBHGFEA Black-Walnut Handle Glass Slicker ↗Craftool Nylon Folder with Removable Slicking Head ↗WUTA Half-Round Black Metal Burnisher ↗Weaver 00080-2 Angled-Tip Leather Edger ↗

Check each model’s dimensions and fitting requirements when choosing equipment to use together.