WUTA / Stitching Irons & Groovers
WUTA Obverse 3.85 mm French Iron Pair
The 3.85 mm obverse selection pairs two- and eight-tooth French-profile irons in DC53 tool steel.
CHOOSE THE TOOL FOR YOUR WORK
A matched short-and-long French-profile pair
Choose this WUTA pair when the slanted French hole profile is the reason for changing tools. The current selection is Obverse 3.85 mm, with a two-tooth and an eight-tooth member. The shorter group is useful to compare for changes in direction, while the longer group covers a longer layout; both belong to the same selected pitch.
The seller describes DC53 cold-work die steel and polishing from handle to prongs. Its obverse alignment is a direction of slant, not a second iron with reverse teeth. A generic wood-handle entry does not settle the exact grip material against the metal-body description, so choose on the established profile and pitch rather than a wood-versus-metal preference.
The seller asks for a soft protective material such as leather under the sharp thin tips and warns against hard objects that can damage them. That instruction belongs to these thin prongs and should not be replaced by a generic hard-surface rule. Compare the adjustable two-tooth WUTA when pitch variation matters, or Weaver for a fixed diamond profile. No particular finished wave pattern or all-material stitching result is guaranteed.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Selected pitch | 3.85 mm |
| Tool configuration | Two-tooth + eight-tooth pair |
| Alignment | Obverse French slant |
| Steel described | DC53 cold-work die steel |
| Finish described | Polished from handle to prongs |
| Protective support instruction | Soft material such as leather; avoid hard objects under sharp tips |
| Model | leather punch-01 |
| Part number | 502810886108 |
| Handle-material limit | Generic wood entry does not resolve the grip construction |
Check the chosen weight, color and included parts on Amazon before ordering.
Where this model is useful
- Two tooth counts give different layout lengths at the same French pitch.
- The current selection identifies both pitch and obverse alignment.
Trade-offs to check
- Exact handle material is not settled.
- No universal thread/needle match or guaranteed stitch appearance is established.
What to check before choosing
Choose the slant direction
This is the obverse selection, not an obverse-and-reverse bundle.
Protect the thin tips
Follow the seller’s soft-support instruction rather than striking the tips against a hard object.
Care instructions
Care & upkeep
Use soft protective material such as leather under the sharp tips; avoid hard objects, per seller.
Your questions about this product
Are both obverse and reverse tools supplied?
The selection is obverse. The two tools differ by two and eight teeth, not by opposite slant directions.
Does eight teeth mean eight tools?
No. It is the tooth count of one member of the pair.
What backing guidance is given?
The seller asks for soft protective material such as leather and warns that hard objects can damage the sharp thin tips.
Other options to consider
About this product information
Exact-ASIN complete available text, bullets, specifications and current variant compared; original buying advice, no physical trial.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.
