BNISE / Layout & Bench Tools
BNISE LD-9118 Digital Thickness Gauge
A 0–12.7 mm digital gauge with a 40×19 mm LCD, spring-loaded spindle and stated 0.01 mm display resolution.
CHOOSE THE TOOL FOR YOUR WORK
Choose digital reading and data options without confusing them with accuracy
Choose BNISE when digital reading and switching between inches and millimeters suit the bench better than a mechanical dial. The stated measurement range is 0–12.7 mm (0–0.5 in), with nominal resolution of 0.01 mm or 0.0005 in. Resolution describes the displayed increments, not a promise that every reading is accurate to the last digit.
The aluminum-alloy tool has a grip handle, thumb trigger and spring-loaded spindle. Its 40 × 19 mm dimension is the LCD size, not the gauge body or anvil. The seller separately claims tolerance below 0.001 in (0.02 mm); those are seller figures, not supplied calibration evidence or a specified contact-pressure test.
For PC transfer, the seller names an RS232 port and requires a Clockwise Tools DTCR-01 cable. That cable, software and calibration standards are not itemized as included. Compare WUTA for a battery-free mechanical 0–10 mm format when digital transfer is unnecessary. Neither display style removes the need to understand contact and compression when comparing soft materials.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Measurement range | 0–12.7 mm / 0–0.5 in, as stated |
| Nominal resolution | 0.01 mm / 0.0005 in, as stated |
| Seller tolerance claim | Below 0.001 in (0.02 mm); not independent calibration |
| LCD dimensions | 40 × 19 mm |
| Body material | Aluminum alloy |
| Controls | Grip handle and thumb trigger |
| Contact mechanism | Spring-loaded spindle |
| Unit display | Inch and metric |
| Data port | RS232 |
| Named transfer cable | Clockwise Tools DTCR-01 required; not itemized as included |
| Model | LD-9118 |
| Listed item mass | 1 lb |
Check the chosen weight, color and included parts on Amazon before ordering.
Where this model is useful
- The range, display resolution and LCD size are explicitly separated.
- A named cable requirement makes the transfer option more specific than a generic PC-compatible claim.
Trade-offs to check
- No calibration certificate, contact force or supplied data cable/software is established.
- Tolerance is a seller claim; nominal unit figures are not reinterpreted as exact conversions.
What to check before choosing
Compare the job, not only the digits
Decide whether digital inch/metric display or data transfer is useful before choosing by resolution.
Plan the transfer accessory
Confirm the named DTCR-01 cable and PC setup separately; an RS232 label does not imply any USB cable fits.
Your questions about this product
Does 0.01 mm resolution guarantee 0.01 mm accuracy?
No. Resolution is the displayed increment; the seller gives a separate tolerance claim.
Is 40×19 mm the gauge size?
No. It is the LCD size.
Is the data cable included?
It is not itemized. The seller requires a Clockwise Tools DTCR-01 cable for transfer.
Is a second gauge included in the case view?
No second gauge is itemized; repeated case imagery does not add another tool.
Other options to consider
About this product information
Exact-ASIN complete available text, bullets, specifications and current variant compared; original buying advice, no physical trial.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.
