FINGERINSPIRE / Rivet, Snap & Eyelet Setters
FINGERINSPIRE Four-Recess Mini Rivet Setter Set
Four measured recesses offer a compact setter selection for checking against small rivet heads.
CHOOSE THE TOOL FOR YOUR WORK
Four measured recesses offer a compact setter selection for checking against small rivet heads
This set is worth comparing when a small rivet head needs a suitably sized setting recess. FINGERINSPIRE supplies four steel hand tools, one each at 4, 4.9, 5 and 6 mm inner diameter. Those are recess measurements, not hole-punch sizes or maximum leather thicknesses. The overall tool length is listed as 100 mm, giving a separate measure for the handheld format.
The corresponding outside head diameters are 6, 6, 7 and 8 mm: the 4 and 4.9 mm recesses use 6 mm heads, the 5 mm recess a 7 mm head, and the 6 mm recess an 8 mm head. That geometry is useful for a fit check, but the listing’s broad references to snaps, eyelets and grommets do not establish exact hardware-system compatibility. No anvil or fastener assortment is named as supplied. Compare Tandy’s Deluxe set when your actual hardware belongs to one of its explicitly named snap/rivet families and you want a supplied anvil base.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Supplied tools | Four steel setters, one per recess size |
| Inner recess diameters | 4; 4.9; 5; 6 mm |
| Overall tool length | 100 mm / 3.9 in |
| Outside head / inside recess | 6/4; 6/4.9; 7/5; 8/6 mm |
| Material | Steel |
| Model | TOOL-FG0001-15-US18 |
Check the chosen weight, color and included parts on Amazon before ordering.
Where this model is useful
- Four specified recess sizes make a geometry comparison possible.
- Each size has its own complete hand tool.
Trade-offs to check
- No exact hardware compatibility matrix, anvil or consumable fastener allocation is supplied.
What to check before choosing
Match the recess, not a punch hole
Compare the rivet head and setting system to the tool; the inner recess is not a punch diameter.
Your questions about this product
Do 4/4.9/5/6 mm mean hole sizes?
No. They are the stated inside diameters of the setter recesses.
Is an anvil included?
No anvil is named in the supplied package; the text refers to using a separate support.
Are four snap fasteners included?
The contents and bullets describe four tools, one in each size. The package-line fastener wording is not evidence of a consumable hardware supply.
Other options to consider
About this product information
Original buying guidance from the exact selected ASIN’s full available description, bullets, specifications and variant choices; no practical trial.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.
